Discussions

• 

  KAN-therm: We build the future of building installations with comprehensive innovative, efficient and sustainable KAN-therm systems

  Established in Bialystok, Poland, over 35 years years, KAN Group is among the global market leaders in the development of modern KAN-therm systems. Relying on decades of engineering expertise, uncompromising quality and continuous innovations, the company has close to 30 000 m² worth of production capacity, over 32 000 m² worth of storage space and more than 1200 employees. Through its international structure involving subsidiaries and strategic partners, KAN Group provides solutions to over 68 countries from Europe, Asia and Africa, turning the KAN-therm brand into a symbol of reliability, technological completeness and global trust.

  2026-06-12Read the article

• 

  Green energy trends in 2026 and what the solar industry can expect – commentary from experts from Smart Solar Technologies – Part II

  After Part 1 of our discussion with Smart Solar Technologies, part of Smart Energy Group, we looked at technological innovations and cells, and now we move the focus onto the future of battery systems and their role as a 24/7 energy reserve in the context of energy consuming AI centers.

  2026-06-05Read the article

• 

  The advantages of a standalone charging station versus the capacity of two-sided stations – expert analysis by TiD Engineering

  When talking about charging electrical vehicles, we still can’t pinpoint a “universally correct” solution – however, we can say that there’s a right solution based on a concrete location. And in many cases, it is the difference between a standalone and a double-sided charging station that is the basis for the success of a business model, whether it is a hotel, shopping center, or logistics park. Leading company T&D Engineering, as a producer and system integrator of electrical charging stations, focuses on a personalized approach when setting up such systems. "Our role is to tell the investor both what he is buying today and how he will maintain it tomorrow. The distinction between a single and a double post is the first step towards building a functional and reliable charging point," T&D Engineering informed BalkanEngineer.com.

  2026-05-29Read the article

• 

  Unisyst Engineering's PLC200-AI industrial controller combines a web SCADA platform with an AI-ready concept in a compact device

  As equipment and technology in general is advancing, businesses continue to actively look for solutions that not only collect and collate information, but also ensure flexible communication and innovative visualization, and can be used for the industry the next day. This is the kind of solution PLC200 is – an intelligent multifunctional industrial controller by Unisyst Engineering, created for reliable monitoring, control and visualization of work operations. "Compatible with artificial intelligence technologies, the PLC200 combines input-output peripherals, communications, and an embedded web SCADA platform into one compact device, which simplifies deployment and increases the efficiency of automation systems," the proven manufacturing and engineering company Unisyst Engineering informed BalkanEngineer.com.

  2026-05-21Read the article

• 

  Weber Etiketten optimizes automated logistics with ECO series of direct thermal labels with permanent adhesive

  The development of modern logistical lines often encounters one unexpected challenge – the physical capability of the label to contain a clear print. In non-top-coated direct thermal printing, the porosity of the paper becomes a major source of issues as it allows heat to dissipate laterally and blur the boundaries of the barcode. As part of the international entity Bluhm Weber Group, Weber Etiketten Bulgaria offers solutions regarding this problem with the series of thermal direct ECO labels with permanent adhesive, relying on increased surface density of the material. By reducing so-called lateral diffusion (lateral heat dissipation), the materials ensures clarity of the symbols even during speeds of 250 mm/s, which is the basis for hassle free work of the automated scanners. "In automated marking systems, the label is a supporting component of the information chain. Any inaccuracy in the microstructure of the paper can lead to defects in the barcode, which industrial scanners cannot ignore, especially at high work rates," Weber Etiketten commented to BalkanEngineer.com.

  2026-05-13Read the article

• 

  Green energy in 2026 and what the solar industry can expect – comments from Smart Solar Technologies experts – part I

  After a turbulent 2025, in which the world added a record 600 GW of solar capacity, the photovoltaic sector enters its “great reconfiguration” phase in 2026. The time of chaotic growth has been replaced with disciplined strategies, and the focus changes from simply installing panels to constructing intelligent, integrated energy systems. And while Europe balanced between overflowing storage facilities and ambitious climate goals, the industry searches for a new balance in pricing and supply chains. In this context, technological advantages and regional independence turn in the new separation line between market leaders and market followers. In a dialogue between engineers from Smart Solar Technologies, part of the Smart Energy Group, we discussed the most important topics in the renewable energy industry for 2026.

  2026-05-05Read the article

• 

  GreMa 3D: With 3D printing technology from Lynxter, the 3DMyMask project is changing respiratory care for babies

  3D silicone printing is entering the neonatology phase with impressive speed, and a leading role in this transition is the French company Lynxter – a pioneer in industrial 3D silicone printing. The 3DMyMask project proves that personalized masks, developed directly in a hospital environment with the Lynxter printers, can improve the effectiveness of non-invasive ventilation and reduce the risk of complications in newborns and premature babies. BalkanEngineer.com was informed more about the project by GreMA 3D, an engineering and production company specializing in 3D equipment.

  2026-04-28Read the article

• 

  T&D Engineering: The "Right to Repair" Directive is a matter of engineering ethics that we have been working with for years

  Almost 2 years ago, Europe officially put an end to the era of single use electronics with the Right to Repair directive. While it was aimed primarily at small electronic items, this regulation dictates the rules also with the infrastructure of electric automobiles, where reliability is paramount. The problem with a lot of charging stations is their “capsule” design, which makes changing separate defective components rather difficult. To answer this, local production in Bulgaria by T&D Engineering bets on industrial mobility, where every part is accessible for service.

  2026-04-22Read the article

• 

  Wilo has announced the 2026 Domestic Water Supply Program with pumping solutions for drinking water, wastewater and rainwater

  Wilo Bulgaria, the sister branch of Wilo Group in Bulgaria has announced its “Domestic Water Supply Program” for 2026. The selection comprises of established, as well as new pumping systems, which are a highlight to its productive portfolio for the current year. “The “Domestic Water Supply Program” includes pumps, accessories and complete solutions for water supply, sewage, drainage, rainwater and building installations, some of which are offered at preferential prices in our sales network," the company informed BalkanEngineer.com.

  2026-04-15Read the article

• 

  Internship 2026: Learn, create and develop in the field of mechanical engineering – what does the new RAIS internship program offer?

  In a world where industry is transforming with the rate of the digital revolution, leading production company RAIS continues to set standards in machine building. With over 30 years of experience and proven leadership in the construction of CNC metalworking machines, the firm not only creates technologies, but also prepares the next generation of engineers. During 2026, the company opened its doors again to the young specialists from professional institutions and technical establishments via its internship program – a beginning which allows for students and graduates to strengthen their theoretical knowledge with real practice with one of the fastest growing companies in the Balkans, and take advantage of the opportunity to establish themselves professionally.

  2026-04-06Read the article

1 2 3 4